Read about other nanotechnology waterproofing solutions offered in the market and how they compare to ours regarding reliability and effectiveness.
In Klang Valley, there are quite a few players in the waterproofing service industry who offer their services at a steal. Among them, you may also spot companies that even claim to use nanotechnology despite having no certification. On a superficial level, these companies appear to offer the best of both worlds – but not all waterproofing service providers are the specialists they claim to be. As a consumer, it is wise to note that overly cheap waterproofing works have many downsides and disadvantages that will cause more harm than good in the long run.
So, how did they manage to offer “nanotechnology” waterproofing services at such a low price?
1. No Proof of Product Certification.
Everybody can make claims on their ads and marketing materials, but they are most likely unable to offer any valid proof of certification. Some may claim that their products are imported from overseas – but bear in mind that the climate in Malaysia differs from that of other countries and may affect the effectiveness of nanotechnology solutions. This is where NanoVerify come into play – this organisation has established stringent tests to ensure that products marketed to mass Malaysians are safe to use and authentic nanotechnology products.
Nano-G is the first waterproofing solution using Nanotechnology in Malaysia, and our methods and solutions are accredited by NanoVerify. This accolade serve as an assurance to clients and customers that Nano-G’s solutions are 100% genuine as claimed.
Nano-G is certified authentic and safe by NanoVerify after undergoing extensive tests.
2. Cheaper Solutions Often Trap Moisture Beneath The Surface.
Post-treatment with cheap solutions can lead to other problems surfacing over time.
The most common cheap waterproofing solutions involve layering surfaces with plastic films or non-breathable coatings. If the work done by contractors is shoddy, the films or coatings end up trapping moisture or humidity from beneath or behind the treated surface – leading to paint bubbling or cracking on the surface after some time.
On the other hand, Nano-G’s nanotechnology waterproofing solution maintains the original breathability and porosity of treated surfaces, because the process involves no “plastic films”. Instead, our solution has the same viscosity as water, is invisible, odourless, and creates water-repelling protection on top and beneath treated surfaces after application by lining the pores and capillaries of the materials with hydrophobic nanoparticles. This allows trapped moisture to exit the surface while preventing external moisture from entering it.
3. Cheaper Solutions Are Not Durable.
As long as the solution involves layering the surface with extra coatings or materials, the coating is susceptible to abrasion, deterioration, or mechanical wear. Depending on the purity and grade of those solutions, the coatings may wear off and eventually need replacement – the cheaper it is, the sooner you’ll have to get contractors to rework the building.
At Nano-G, not only our nanotechnology waterproofing solutions are resistant to abrasion, deterioration, or mechanical wear, but they are also more resistant to UV damage and do not turn yellow over time. These factors combine to demonstrate that surfaces treated by Nano-G exhibit prolonged durability against various weathering and human-use damages.
Nano-G’s Nanotechnology Waterproofing solutions has high durability against scratches and abrasions.
4. Cheap solutions may not be safe for people.
To lower the costs, companies that offer cheap waterproofing services use solvent-based solutions – these are highly toxic and can cause health issues when inhaled in the long run, for inhabitants of premises and contractors who are continuously exposed to these hazards.
Nano-G believes in creating safe solutions for people and the planet. Our hospital-grade Nanotechnology 4th Generation Waterproofing solution is certified as non-toxic, approved by the Ministry of Health Malaysia (MOH), and earned the Green Label certification.
With the Green Label certification and approval from MOH, this makes us the one and only credible choice of waterproofing specialist by numerous hospitals across Malaysia.
With the Green Label certification and approval from MOH, we are one of the best credible choices for waterproofing specialists by numerous hospitals across Malaysia.
5. Unreliable Product.
The saying goes – “you get what you pay for”. Think about the pain of dealing with the aftermaths of installing a poor-quality material in your premises, only to spend so much more removing and replacing them. Yes, this applies to waterproofing too!
We go out of our way to ensure that our customers are happy and satisfied months after treating their water leakage issues at home and in their buildings. This gives us and our future clientele the assurance that our waterproofing works are reliable, durable, and professional in every aspect. Check out Nano-G’s customer testimonials here:
Conclusion
At Nano-G, we have helped tens of thousands of residential homes and commercial buildings combat mysterious water leakage issues on their roofs and inside their walls. Our hospital-grade Nanotechnology 4th Generation Waterproofing solution boasts an extensive track record of success as the most effective waterproofing solution in the market.
Skip the painful and expensive trial and error process of dabbling with cheap waterproofing methods – claim your FREE inspection from Nano-G today and jumpstart the process of making your premise leak-free.
Nano-G’s waterproofing professionals are highly-trained in the technical aspects of our nanotechnology solution as well as application and safety guides. This way, we can offer all our customers and clients money-back guarantees that are aimed to solve your water leakage issues.
Learn more about our solution here:
