Kuala Lumpur, Selangor, Ipoh, Seremban & Johor

Month: April 2023

Patient Protection & Slip-and-Fall Prevention in Hospitals and Clinics with Nano-G’s Nanotechnology Anti-slip Floor Coating

Safeguard your patients and medical facilities from suffering the physical, emotional, and legal impact of an easily avoided problem.

Slip and fall accidents are a significant concern in hospitals and clinics, as they can result in serious injuries and lawsuits. Some factors, including wet or slippery floors, are known to contribute to these accidents – in fact, they are widely discussed in the healthcare industry around the world, and the World Health Organization initiated World Patient Safety Day, celebrated every 17 September, to raise awareness on this issue. Fortunately, advances in nanotechnology have led to the development of anti-slip floor coatings that can help prevent slips and falls in hospitals and clinics.

Case Study

Water Puddle in Hospital Causes Slip and Fall Resulting in Tenth-degree Disability.

The incident happened in Chongqing City, China where Ms. Deng suffered a severe fall in a hospital corridor, resulting in a tenth-degree disability and significant physical and psychological injuries. The investigation revealed that the fall was caused by a puddle of water. To further solidify her case, hospital surveillance cameras showed her slipping on the water puddle while waiting outside a clinic with her child. She fell heavily, unable to cushion the fall due to holding her child tightly. The incident has raised questions in China about who should bear the responsibility for such accidents in public places.

A momentary lapse in judgment can cause someone else to suffer a lifetime of pain.
“Now, I can’t stand for a long time, I can’t run, I can’t dance, none of these things. So much so that I can’t do simple tasks if I stand for too long at work. It’s just that nothing can make up for my pain, which is going to last a lifetime.”Ms. Deng

The Importance of Anti-slip Coatings in Hospitals and Clinics.

1. Reduce the risk of slip and fall accidents.

Slip and fall accidents can be fatal, or result in injuries that can permanently destroy a person’s health, especially for older adults or those with pre-existing medical conditions such as high blood pressure, a stroke, or those recovering from surgery. Anti-slip coatings can help reduce the risk of these accidents by increasing the friction between floors and shoes, thereby improving traction.

2. Hospitals and clinics have to ensure that their patients are safe while receiving care.

By using anti-slip coatings, facilities can provide a double assurance of an additional layer of safety, thereby further reducing the risk of accidents that could harm patients.

3. Reduce liability.

Slip and fall accidents can result in costly lawsuits and legal fees. Hospitals and clinics can reduce their liability and avoid potential legal issues by proactively addressing slip and fall hazards with anti-slip coatings.

4. Protect staff and visitors.

Slip and fall accidents are not limited to patients. Staff and visitors are also at risk of these accidents, such as janitors who are tasked with cleaning the floors, kitchen staff working on wet and oily floor surfaces, medical staff who work with biohazards, and more.

Above is a list of reasons why anti-slip coatings are important in hospitals and clinics.

How Nano-G’s Nanotechnology Anti-Slip Floor Coating helps prevent slips and falls in hospitals and clinics

Nano-G’s Nanotechnology Anti-Slip Floor Coating is a non-toxic, non-intrusive, and no-renovation-required solution that provides an additional layer of invisible friction to hospital and clinic floors, making them much less slippery after treatment. The solution can be applied without significant disruptions to hospital and clinic operations, making it a convenient and effective solution for improving safety in healthcare environments.

Our transparent and durable anti-slip floor coating is highly recommended for hospitals and clinics, as it provides a highly slip-resistant surface that is effective in both wet and dry conditions, making it ideal to treat high foot traffic areas such as hallways, bathrooms, and patient rooms. 

Our nanotechnology anti-slip coating is safe and non-toxic throughout the application process and does not emit any chemical fumes or dust. Hence, patients and staff can continue having peace of mind while the application is in progress.

Moreover, our solution helps reduce fall risks to less than one-in-a-million!

You're More Likely To Get Struck By Lightning Than Slip On A Nano'g Treated Floor

Nano-G’s nanotechnology anti-slip coating is a tried and true method to prevent slip and fall.

Conclusion

In conclusion, preventing slip and fall accidents are a top priority for hospitals and clinics to ensure the safety of their patients and staff. With Nano-G’s Nanotechnology Anti-Slip Floor Coating, hospitals and clinics can significantly reduce the risk of accidents and make patient safety the cornerstone of its operations by providing a highly slip-resistant surface that is effective in wet or dry conditions. 

Our transparent and durable coating is non-toxic and safe for use in healthcare environments, and our dust-free and noise-free installation process minimizes disruptions to hospital and clinic operations. 

With our highly recommended anti-slip coating, hospitals and clinics can take proactive measures to prevent slips and falls accidents and maintain a safe environment for all.

Want to learn more about anti-slipping your clinic or hospital? Read on here:

Nano-G What Happens When a Customer Slip and Fall In Your Business Premise?
Nano-G The Best Way Healthcare Facilities Can Prevent Slip & Fall Accidents at the Toilet

Contact us today for a FREE consultation and we will walk you through the process and provide you with a quotation for anti-slip treatment of your health care facility.

Facebook m.me/nanogmalaysia
WhatsApp nanog.wasap.my
Or give our hotline a call at 1800-18-6266

Nano G Waterproofing for New Home

Make Your Property Investment Worth Your While by Waterproofing Your New Home

Silent leaks can turn the joy of obtaining a dream home into a long-term nightmare situation if not addressed early.

For many of us, owning a dream home is a financial investment that involves significant portions of our life savings and monthly income. But the initial excitement of securing a new property can potentially become a sour investment when water damage reveals the signs of faulty waterproofing, a commonly overlooked problem with devastating long-term effects. However, you can avoid this by taking preventative measures to mitigate the risks altogether. By conducting regular inspections and investing in quality waterproofing measures, you can make your dream home a worthwhile investment from the start.

Case Study

(Left) Green mold appearance on water-damaged walls, (right) New homeowner Wong revealing the leakage in his new home. Source: https://www.thestar.com.my/metro/metro-news/2023/02/17/in-a-fix-over-leaks

Waterproofing Issue Can Prevent New House Owners From Moving Into Their Dream Homes

Water leakage problems in a newly-purchased homes can happen to the best of us – sometimes, even making waves in the news. As featured in the local paper The Star, after receiving the keys to his million-ringgit home almost three years ago, lecturer Dr. Wong Ya Ping was unable to move in due to ongoing waterproofing issue. Apparently, on the day he obtained the keys in March 2020, there were already indications of moisture in the porch area. Although the property was still subject to the developer’s defect responsibility, dealing with the hassle and disappointment can be disheartening.

In fact, the rising number of inter-floor leakage cases has more than doubled in Klang Valley’s strata developments.

Nano G Waterproofing For New Home Number Of Cases

The numbers reflect only those who report the water leakage to DBKL, the real number of cases most definitely exceeds the statistics in the report above.

According to the statistics released by Kuala Lumpur City Hall (DBKL), they received 1,265 water leakage reports last year compared to only 489 reports in 2018. Similarly, all local authorities in Selangor cumulatively recorded 1,318 reports in 2021 compared to 778 reports in 2017. Kuan You Wai, a member of the Standards Malaysia Department waterproofing committee, said it was the second most common complaint received by the Strata Management Tribunal!

Here are the top 3 common signs of water leakage at home.

1. Mold and mildew

Nano G Waterproofing For New Home Mold & Mildew

Patches of green, brown, or black that look like fungal growth are evidences of mold and mildew growth.

Persistent water leaks in warm spaces provide the perfect conditions for unsightly mold and mildew growth. In Malaysia, where the climate is warm and humid all year, mold and mildew develop quickly following a water leakage problem in buildings. Long-term exposure to these microorganisms commonly leads to upper respiratory issues and induces allergic reactions, with asthma sufferers being the most susceptible. In extreme cases, areas affected by the water leak could develop a type of toxic black mold that has the potential of causing serious health complications.

2. Peeling or plistering paint or wallpaper

Nano G Waterproofing For New Home Blistering

Peeling or blistering paint and wallpaper occurs when humidity is too high or frequent contact with wet conditions – both are key indicators of a water leakage problem.

Paint or wallpaper that peel or blister indicates a water leak somewhere behind your wall. This unfortunately means it has been an ongoing issue and needs immediate attention to prevent further damage. Damage at this point, in worst-case scenarios, would require you to replace structures such as drywall and wood as they readily absorb any available moisture in their surroundings, making the perfect environment for uninvited microbes to thrive inside. 

3. Damaged flooring – especially wooden ones

Nano G Waterproofing For New Home Water Damage

Wooden flooring damaged by water leakage problems greatly compromise the safety of the occupants, as it can give way due to the wood rot.

Hidden leaks from underground pipes can also appear as warps, stains, or soft spots on your floors, often in bathrooms or areas at home that is near a water source or high in humidity. This would result in loose tiles and planks or cracked and peeling caulking on hard floorings. If you have carpeted areas, pay attention to damp spottings or the unpleasant scent of a strong mustiness. 

Preventing the Development of Mold Growth

The presence of mold in your home is not only a health hazard, but it will also cost you extra to properly eliminate the problem once it is set. Instead of waiting for the point of no return, you can always prevent it from reaching that level by engaging Nano-G for our Nanotechnology Waterproofing solution.

How does it work?

Instead of the conventional waterproofing method of applying a plastic film over the surface, the patented nanotechnology solution Nano-G uses is applied with a paintbrush. The water-based solution creates an invisible, hydrophobic layer that prevents water from seeping even through hairline cracks – by lining the capillaries inside treated surfaces almost an inch deep! 

Maintaining the Value by Waterproofing your New Home with Nano-G

Properties lose value over time due to the damage from wear and tear. That is why many homeowners see building maintenance as one of the most important budgets to set aside. If you are the owner of a new home, you will benefit the most from extending the lifespan and durability of your roofs, walls, and ceilings with Nano-G’s extra protection against water leakages and mold growth – allowing you to maintain that fresh feeling of a new home.

If you have already spent a fortune on renovation but forgot about waterproofing your new home, you don’t have to fork out extra resources to hack up your home and start over as Nano-G provides you with the ultimate solution that sustains the value of your investment with a no-hacking, non-intrusive, non-toxic, and eco-friendly waterproofing solution. 

Nano-G CE Marking Registration

Nano-G Introduces Its 4th Generation Hospital-Grade Nanotechnology Waterproofing Solution

We made our mark in the industry by being the first waterproofing solution in Malaysia to receive the NANOVerify certification by SIRIM. Engineered with a patented Greek Technology with a stringent CE quality marking scheme, our solution has also attained its  environmentally friendly status with the much-coveted Green Label certification. Moreover, our rich portfolio of having served local hospitals and homes nationwide has also earned us a reputation as a hospital-grade waterproofing solution. 

Not only does our nanotechnology waterproofing coating offer high breathability to treated surfaces – it is relatively longer-lasting, more durable, UV-resistant, and can withstand harsh weather across the world, as affirmed by its country of origin – Greece.

Conclusion

The quote “prevention is better than cure” pretty much sums up the content of this article – a water leakage, although seemingly a small matter, can have pretty devastating effects on untreated buildings and your sinking fund. 

If you wish to get started, you’ll be glad to know that you don’t need to invest much of your time, finance, or effort to keep your property safe from water leakage problems. All you have to do is to choose a time and day, and we will send over a team of waterproofing specialists to your home to inspect, diagnose, and treat your desired areas.

Want to know more about our waterproofing service? Read on here:

Nano-G 13 Questions about Nano-G Nanotechnology Waterproofing
Nano-G Waterproofing Solution

Contact us today for a FREE consultation and we will walk you through the process and provide you with a quotation for waterproofing your new home.

Facebook m.me/nanogmalaysia
WhatsApp nanog.wasap.my
Or give our hotline a call at 1800-18-6266